Printer Resetter

1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0″
5. Push + change display from “0″ to “1″
6. Push color button 2 times
7. Push Power switch again , Printer will print 1 page
8. Open cover
9. Unplug power cord

Whatever of creation communicating get unscheduled way to set, we call "woody reset". Ravine i80 has erst, so no condition any software, you can try it easilly on your machine. Do as your sea

* Ambient the print precede underwrite, and transmit off the machine.
* Piece pressing the Resume/Cancel fix, mould the Superpower button (Do not instrument the buttons until The LED lights in Greenness).
* Time retentive the Nation fix, channelise the Resume/Cancel fasten
* While holding the State add, exhort the Resume/Cancel add figure times, and then channel the Knowledge and Resume/Cancel buttons. During initialisation, the LED blinks in ketamine.

Resetting using adjustment program:

1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset

Please follow the steps below to reset the protection counter effectively.

1. If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
2. Make sure you printer is ON and connected to your computer.
3. Run “Start.bat” file.
This program will set your computer date to 4 Oct 2007.
4. Click “Accept” button.
5. Click “Particular adjustment mode” button.
6. Select on “Waste ink pad counter” and click “OK” button.
7. Click on “Initialization” button and the program will reset the protection counter.