Printer Resetter

Showing posts with label Epson. Show all posts

Showing posts with label Epson. Show all posts

Epson Stylus 1160 resetter

11/30/2013 by me

Epson Stylus 1160 resetter

To perform the reset tiens what to do is the following:

Hay que presionar y mantener apretado el boton de LOAD/EJECT (tomar hoja) y el de Cleaning (limpieza) . We must press and hold the button LOAD / EJECT (take up) and the Cleaning (cleaning).

Mientras mantienes apretados esos botones , tienes que presionar el boton de POWER (encendido) y tenerlo apretado hasta que las luces (ink out – tinta vacia y paper out- falta papel) empiezan a titilar o parpadear. While holding these buttons, you must press the power button (on) and keep it tight until the lights (ink out - empty ink and paper out-out of paper) start to flash or flicker.

Cuadno suceda esto suelta todos los botones. When it has to happen this release all buttons.

Cuando pasen 3 o 4 segundos apreta y mantenlo apretado el boton de CLEANING (limpieza) hasta que las luces que titilaban dejen de hacerlo. When you spend three or four seconds click and hold down the button CLEANING (cleaning) until the lights flickered stop.

YA ESTA!!! NOW THIS! ya quedo lista para usarla!! and am ready to use!

Seria conveniente que cada vez que se haga este procedimiento hacer una limpieza a la esponja interna de la impresora, por que alli deja depositado todo el exceso de tinta de la impresora y podria derramarse. It would be desirable that each time you do this procedure done to clean the sponge inside the printer, because there left on deposit all excess ink from the printer and may spill. Esto no es 100 % necesario pero seria muy bueno que lo hagas. This is not 100% necessary but it would be very good to do so.

Posted in: 1160, Epson, resetter, stylus | | |

Adjustment Program for Epson PictureMate printer

11/26/2013 by me

Adjustment program or software resetter for Epson PictureMate printer. On the internet I found two versions of Adjustment program for printers PictureMate, but it seem when the program run, there no difference about the both program. I tested to run this adjustment version in my computer, it no date setting requires like other adjustment program for epson printers. The PictureMate Adjustment program software can be used copy EEPRsaya data, Head Cleaning, Inkcharge, Check patter, reset waste ink counter and many again.
I dont know this software support for all Epson printers PictureMate version or not. But to use this software not differ with other adjustment program version. Here the screen shot of the adjustment program.

How to use this software

Download (view download link below) and extract the software. Then Run this Adjustment program. Click particular adjustment button
Change the adjustment setting and adjust to your printer type
Select consumable maintenance counter, then click ok.
Click initialization button, finish

To download this software visit this link, Adjustment Program PictureMate (435k)

Posted in: adjustment, Epson, for, picturemate, printer, program | | |

How To reset the protection counter of Epson SX105 and SX106

11/24/2013 by me

Epson SX105 and SX106 Adjustment Program

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"
Please follow the steps below to reset the protection counter effectively.

Double click AdjProg.exe.
Click “Accept” button.
Click "Select" button. and select your printer model then click "OK"
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” button and the program will reset the protection counter.
Turn off the printer as a program instructed then turn on again.
Click “Finish” button. and its done!

Warning: You might end up with ink leaking out of the printer if you dont either replace the waste ink pad or install external waste bin.

AdjProg.exe

Posted in: and, counter, Epson, how, of, protection, reset, sx105, sx106, the, to | | |

How to reset the protection counter of Epson T27 Resetter

11/20/2013 by me

Epson T27 Adjustment Program
FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"

Please follow the steps below to reset the protection counter effectively.

Double click AdjProg.exe.
Click “Accept” button.
Click "Select" button. and select your printer model then click "OK"
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” button and the program will reset the protection counter.
Turn off the printer as a program instructed then turn on again.
Click “Finish” button. and its done!

Warning: You might end up with ink leaking out of the printer if you dont either replace the waste ink pad or install external waste bin.

Posted in: counter, Epson, how, of, protection, reset, resetter, t27, the, to | | |

Driver Download for Epson Expression Home XP 30 Driver

11/18/2013 by me

Driver Download for Epson Expression Home XP-30 Driver

Epson Expression Home XP-30

- File name : epson374116eu.exe

- File Size : 15.90MB

- Version : 6.90

- Release Date : 18-Jun-2012

Compatibility and System Requirements :

- Windows 7

- Windows 7 (x64)

- Windows Vista

- Windows Vista (x64)

- Windows XP

Epson Expression Home XP-30 Driver
Source direct link

Posted in: 30, download, driver, Epson, expression, for, home, xp | | |

How to reset the protection counter of Epson Stylus T10 Resetter

11/16/2013 by me

Epson Stylus T10 and T11 Adjustment Program

FIX PRINTER ERROR "parts inside printer end service life, waste ink pad counter overflow error"

Please follow the steps below to reset the protection counter effectively.

Double click Loader.exe.
Click “Accept” button.
Click "Select" button. and choose your printer model then click "OK"
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” button and the program will reset the protection counter.
Turn off the printer as a program instructed then turn on again.
Click “Finish” button. and its done!

Warning: You might end up with ink leaking out of the printer if you dont either replace the waste ink pad or install external waste bin.

Posted in: counter, Epson, how, of, protection, reset, resetter, stylus, t10, the, to | | |

How To fix error message clean sensor on Epson Aculaser C2600

11/12/2013 by me

How To fix error message "clean sensor" on Epson Aculaser C2600

Le message "Clean Sensor" ou "Détecteur Nettoyage" a plusieurs causes.

Procedure 1:

The firts thing to do: open the cover (cover D):

Close it very slowly: it will clean the sensor.

Do it 2 or 3 times in succession:

Procedure 2:

Open the front cover (cover D)

Remove the waste ink box.

Clean the photoconductor wire: hold the cleaning knob and move it slowly in and out a few times (5-10 times):

Clean the exposure window: hold the knob (under the photoconductor cleaning knob) and move it slowly in and out a few times (5-10 times).

Put back the waste ink box.

Close the cover

Power off the printer during 5 minutes

Procedure 3: When using remanufactured toner.

Verify each toner.

Procedure 4:

Look inside the transfert belt if a roller did not go out of its axis.

Posted in: aculaser, c2600, clean, Epson, error, fix, how, message, on, sensor, to | | |

Waste Ink Counter Reset Epson cx3900

10/25/2013 by me

Here this step to reset Counter printer epson cx3900

Switch on printer
Set the computer date setting date to 23 january 2007
Run adjprog.exe from the extracted folder
Click accept
Click particular adjustment mode
Go to maintenance then Select waste ink pad counter then click ok
Click on “check button” till its done then click on “initialization button” then click on “finish button”
Switch off printer for 5secs then switch on again
After you reset succesfully, you can change the date back to normal

Posted in: counter, cx3900, Epson, ink, reset, waste | | |

resetter Printer Epson R230X

10/13/2013 by me

Easy method to resset Printer Epson R230X Download SSC Service Utility
software. Click here to get the software. The steps: 1. Make sure
printer in the living conditions and are connected with a computer
(driver printer sudah terinstall) 2. Instal SSC Service Utility and run
the program 3. Setting configuration printer model.Choose Epson Stylus
Photo R230. then close the main window 4.At the bottom right
taskbar clik right icon SSC Service Utility, choose Protection Counter
-> clik reset protection counter -> choose Yes at pop up which is
ask “Have you Replace waste ink pad”

5. Restart printer, and printer no blinks anymore get

Posted in: Epson | | |

Resetting cartridge Epson R290

10/03/2013 by me

When I have trouble on my cartridge R290, is currently the forums neighbors.
Hopefully it can help you .
The original cartridge of R290 havechip system that calculates the number of print-out that we already do, after reaching the maximum limit will require the replacement of the printer cartridge.
This also happens on the system infus R290, infus implement this system combine the chip, which is equipped with a switch / switch on the top of the cartridge.
Function of this switch is to reset the volume of the print cartridge if the replacement cartridge is required, meaning we R290 printer "deceit" as if we have to change with a new cartridge.

Note: almost all types of printers epson latest chip I use it is difficult to be modified, with different types such as the previous R230, R250, C67, etc., which can be reset to its done in auto, for the latest types of reset is done with the help of user / users.

Heres How to reset cartridge R290:

(The need to reset the printer cartridge, printer will give you a warning, a light red / orange blink-blink in the reset button (on the power button)).
Open the printer cover
Remove the paper / material feed sensor cover,
Press the reset (the power button) several times (1-3x), to the position of the cartridge in the position of the replacement cartridge (right),
Pejet button switch on the cartridge (rather long), then release,
pairs back penyumpal paper sensor cover
close the back cover printer
press reset button again, the printer reacts to give voice to the paper I draw a very long time,
the printer is ready for use again,
The way above will be done each time the printer requires replacement cartridge, which is marked with a light reset blink-blink red / orange.

this is the resetter.
Resetter R290 Download

Posted in: Cartridge, Epson, r290, resetting | | |

Epson Stylus Photo 700 service manual

6/28/2011 by me

This guide describes basic functions, the theory of electrical and mechanical operations procedures for maintenance and repair of the EPSON Stylus Photo 700 and EPSON Stylus Photo for EX. Instructions and procedures included therein are intended for experienced repair technicians, and must be taken of the precautionary measures of the previous page.

Posted in: Epson | | |

Epson 7800 Evaluation For Giclee and Fine Art Photography

6/05/2011 by me

Epson 7800 Evaluation For Giclee and Fine Art Photography

What is the nature of the set behind the brand examine? Is this assort the maker, distributor, or rebranding? Epson designs the publish heads, the software, and the publish engine. The machine itself is then manufactured through Mutoh. Mutoh has the factories that fabricate umpteen other brands much as for Agfa. Mutoh also reportedly makes the Seiko printers (this is widely stated but not fully habitual). Ironically, Mutoh also sells a Peninsula UV printer that it does not fabricate nor plan. This printer was provided for judgment by John Lorusso, Parrot Digigraphic, www.ParrotColor.com .

Posted in: Epson | | |

How to Reset counter EPSON STYLUS C63, C64, C65, C66

1/11/2011 by me

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhpF0XxMx5zY8KwOAW8A33KJtrWlEUCWrgCkws1leV20KE6Gsv7puPUw_FaqsoxG5ZMl3kp99zgV9ncsVX3VP5-GWMoN9s3IBQTibQA8ctCJ4VGDSCZEShC24EXXI-aKxigTgnktWk7rBg/s320/Epson+Stylus.jpg

Resetting using adjustment program:

1. Run adjustment software by clicking “APSC6364_Ver16.exe”
2. Set model name and port, Ok
3. Click maintenance tab
4. Check waste ink pad counter
5. Click reset

Posted in: Epson | | |

Reset Protection Counter for Epson 1390

by me

Reset Protection Counter for Epson 1390

Please follow the steps below to reset the protection counter effectively.

1. If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
2. Make sure you printer is ON and connected to your computer.
3. Run “Start.bat” file.
This program will set your computer date to 4 Oct 2007.
4. Click “Accept” button.
5. Click “Particular adjustment mode” button.
6. Select on “Waste ink pad counter” and click “OK” button.
7. Click on “Initialization” button and the program will reset the protection counter.

Posted in: Epson | | |

Epson WorkForce 500 manual

11/07/2010 by me

http://www.laptopmag.com/uploadedImages/Multimedia_Assets/Images/2008/Reviews/accessories/Epson-Workforce500_g1.jpg

Download Inexact Epson Personnel 500 Manual.pdf This Epson Men 500 individual drill, Epson Personnel 500 Person Draw, Epson Hands 500 Owners Manual, Epson Personnel 500 activity recitation contains the information you requisite when start, equipment, setting, configuring, upkeep and troubleshooting, operating manual the Epson Personnel 500.

Posted in: Epson | | |

EPSON Stylus Color 680 EPSON Stylus Color 680

9/30/2010 by me

EPSON Stylus Color 680 EPSON Stylus Color 680

EPSON Stylus Color 680 EPSON Stylus Color 680

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds. Pressing and holding LOAD / EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.

Posted in: Epson | | |

Resetter for EPSON Stylus Color

9/28/2010 by me

Resetter for EPSON Stylus Color

EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160 EPSON Stylus Color 440, 640, 740, 460, 660, 670, 760, 860, 880, 1160

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds. Pressing and holding LOAD / EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.

Posted in: Epson | | |

EPSON Stylus Color 400, 600 EPSON Stylus Color 400, 600

9/26/2010 by me

EPSON Stylus Color 400, 600 EPSON Stylus Color 400

EPSON Stylus Color 400, 600 EPSON Stylus Color 400, 600

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds. Pressing and holding LOAD / EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds.
Release all buttons. Release all buttons.

Posted in: Epson | | |

EPSON Stylus Photo 890, 1280, 1290 EPSON Stylus Photo 890, 1280, 1290

9/24/2010 by me

EPSON Stylus Photo 890, 1280, 1290 EPSON Stylus Photo 890, 1280, 1290

EPSON Stylus Photo 890, 1280, 1290 EPSON Stylus Photo 890, 1280, 1290

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led. Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Power led.
Release all buttons. Release all buttons.

Posted in: Epson | | |

EPSON Stylus Photo 785, 895 EPSON Stylus Photo 785, 895

9/22/2010 by me

EPSON Stylus Photo 785, 895 EPSON Stylus Photo 785, 895

EPSON Stylus Photo 785, 895 EPSON Stylus Photo 785, 895

Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led. Pressing and holding Maintenance and Roll Paper buttons, press POWER button, You will see blinking Error led.
Release all buttons. Release all buttons.

Posted in: Epson | | |

Subscribe to: Posts (Atom)

counter on blogger